Analogue Solutions MX61 Six Input Audio / CV / Gate Mixer with Inverter NoiseBug Price : $75.00 Related Items: Analogue Solutions Modules are the same physical size and use the same power connectors as Doepfer a100 modules. They will mount in Doepfer eurorack cases and are 100% compatible when patching. The red stripe on the power ribbon is red line down if used with Doepfer cases. Included is a eurorack power ribbon and eurorack screws. Analogue Solutions screws available upon request. Width 4HP Manufacturer Description: Mixer: 6 input unity gain CV/Audio/Gate mixer with normal and inverted outputs. Width 4HP Details The MX61 is a 6 input unity gain mixer. It can mix audio, control voltages and gates. It allows you to bring many signal source together to be sent to another module, such as several VCOs into one filter, or to be used to mix audio sources and bring them together to an external recording device or mixing desk. It has 2 outputs, a normal (positive) output, and an inverted output. Use Audio Mixer Use this to mix audio in instances where you have many sources you wish to mix to one mono channel, e.g. several percussion modules. When mixing audio, you would normally use the normal output. CV Mixer Several CV sources can be mixed to make a more complex control signal. E.g. mix an LFO with an envelope signal. Inverter When the inverted output is used, the signal is inverted so it becomes a negative signal (or a negative signal becomes positive). For example, put 5V through, and you get -5V out. An example of a useful application of this is to create auto-pan. Feed an LFO into the mixer. Take the normal output to 1 VCA, and the inverted output to another VCA. Pan the 2 VCAs hard left and right. Feed the same signal into both VCAs and it will pan between the speakers! Gate Mixer By taking different step outputs from a CV8 or GT8 and mixing them with the MX61, new step patterns can be created. The MX61 has a -10 to +10V range. Controls & Sockets: 6x Inputs, Inverted output, normal output