Related Items:
Analogue Solutions Modules are the same physical size and use the same power connectors as Doepfer a100 modules. They will mount in Doepfer eurorack cases and are 100% compatible when patching.
The red stripe on the power ribbon is red line down if used with Doepfer cases.
Included is a eurorack power ribbon and eurorack screws. Analogue Solutions screws available upon request.
Width 12HP
Manufacturer Description:
4x passive attenuators - for level control
width 12HP
4 attenuators
This is like a volume control module. Pass a signal through it (audio or CV) and then use the knob to lower the signal level.
Four independent attenuators (level controls) in one module. Attenuators are passive controls (they use no power) that are used to decrease the level of an audio or CV signal.
The signal can be changed from full level right down to zero. Use anytime you need to decrease the level of a signal.
A typical example is in conjunction with our MX61 6 input mixer. As this mixer does not have level controls, you can use the attenuators of the ATT4 to adjust the levels before they are mixed with the MX61.
Controls In Detail
The 4 Attenuators are identical.
LEVEL (1-4)
Alters the input signal level
Sockets In Detail
IN (1-4)
Attenuator input.
OUT (1-4)
Output from attenuator.
