Analogue Solutions GT8 8 Step Dual Gate Sequencer NoiseBug Price : $185.00 Related Items: Analogue Solutions modules are the same physical size and use the same power connectors as Doepfer a100 modules. They will mount in Doepfer eurorack cases and are 100% compatible when patching. The red stripe on the power ribbon is red line down if used with Doepfer cases. Included is a eurorack power ribbon and eurorack screws. Analogue Solutions screws available upon request. When using this module in a Doepfer case, an a-100 ad5 +5v adapter board is required. Width 18HP Manufacturer Description: Analogue Sequencer. 8 Step dual Gate sequencer with 8 step trigger outputs. Width 18HP Requires 5V If you have a low budget, you can build up and buy modules as and when they can be afforded. As they are single channel completely independent sequencers, they can be bought as and when they are needed, they can be clock at different clock divide ratios, they can each have different step lengths. None of these features are available with multi-channel sequencers. These sequencers have a step out socket for each step (mainly for use with adjusting sequence length. Other sequencers use switches to change length). The advantage is that the sockets need not only be used for changing sequence length, but they can be used individually to clock or trigger other devices. The 8 step outs are basically the same as a Doepfer A161 trigger sequencer module making the CV8 and GT8 exceptional value. When used with our master clock module MC01 , all sequencers can be reset globally from the Master Clock and they will be reset to THE LAST STEP. With just about all other sequencers, especially when using MIDI as the master clock, the sequencer must manually be stepped to the last step, otherwise when the clock is started, step 2 is in fact the first step triggered. Our automatically go to the last step eliminating this problem (see note in MC01 section for more explanation). Main Applications For triggering envelopes, clocking other devices, or controlling CV's. The GT8 comes with a 5V range as standard. This range is ideal for triggering most monosynths and envelopes. If requested when ordering, the CV8 can be given a 10V range. It is possible to change to range between 5 and 10V by adding or removing resistor R13 (100K) on the main board. Having this resistor in place makes the range 10V. Changing this yourself is safe to do but will invalidate the warranty. Controls & Sockets: 8x Gate switches (1/off/2), Step button 8x Postition LEDs. 8x step outputs, Gate 1 Out, Gate 2 Out, Clock Input, Reset Input