Return to the NoiseBug home page Have you put any NoiseBug goodies in your shopping cart? Sign up for the NoiseBug Newsletter! Search the NoiseBug site for the product of your choice

 
Analogue Solutions

Plan B Analogue Solutions VCO 6HP - Voltage Controller Oscillator
Analogue Solutions VCO 6HP - Voltage Controller Oscillator

NoiseBug Price : $110.00

Yes, the Analogue Solutions VCO 6HP - Voltage Controller Oscillator is in stock!

Related Items:
Analogue Solutions Concussor Modules are the same physical size and use the same power connectors as Doepfer a100 modules. They will mount in Doepfer eurorack cases and are 100% compatible when patching.

The red stripe on the power ribbon is red line down if used with Doepfer cases.

Included is a eurorack power ribbon and eurorack screws. Analogue Solutions screws available upon request.

Width 6HP

Manufacturer Description:
The VCO 6HP is one of the newest offerings from Analogue Solutions. This slim VCO is designed to give you maximum raw analogue power without taking too much real estate in your case or rack. The range is divine and can go down enough to be used as a LFO.

Voltage Controlled Oscillators (VCOs) in general

The VCO or signal generator, commonly found on most music synthesizers consist of an exponential amplifier, a resetable integrator and waveshaping circuitry. ‘Voltage Controlled Oscillator’ means an oscillator whose frequency can be controlled by an external voltage.

A VCO is responisble for the pitch of a sound and its basic timbre. Most VCOs will offer a variety of wave forms. Some VCOs offer the facility to alter the pulse width of a square wave either manually or with a voltage (pulse width modulation).



The red stripe on the power ribbon is red line down if used with Doepfer cases. Controls In Detail

Tune

The VCO has a wide ranging tune control. Turning Tune alters the basic pitch of the oscillator.

Pulse Width

You can alter the pulse width (duty cycle) of the square wave. Turning this gives a sound similar to chorusing. In the centre position a square wave is produced.

Square Level

This sets the output volume of the square waveform output.

Sockets in Detail

CV in

This socket is the pitch CV control input and is used to control the pitch of the oscillator.

PW

This is a pulse width control CV input. Use a -12 to +12V voltage in this socket to alter the pulse width of the oscillator square wave.

Sawtooth Out

This is the audio output for the sawtooth waveform.

Square Out

This is the audio output for the square waveform. Its level is affected by the square level pot.

General Specification

Inputs

CV

PW

SYNC

Outputs

SAW

SQUARE

Controls

Tune

Glide

Pulse Width

Saw Level

Square Level

Size

6HP

Power

+/-12V, GND using Doepfer power socket.