Analogue Solutions M2CV Midi to CV NoiseBug Price : $199.00 Related Items: Analogue Solutions modules are the same physical size and use the same power connectors as Doepfer a100 modules. They will mount in Doepfer eurorack cases and are 100% compatible when patching. The red stripe on the power ribbon is red line down if used with Doepfer cases. Included is a eurorack power ribbon and eurorack screws. Analogue Solutions screws available upon request. When using this module in a Doepfer case, an a-100 ad5 +5v adapter board is required. Width 12HP Manufacturer Description: MIDI to CV converter Width 12HP Requires 5V M2CV is a MIDI to CV converter for use in Concussor, Doepfer and Integrator style modular systems. It is used to control analogue modules from a MIDI source. Use this module to control your modular synth from a MIDI keyboard or sequencer. Pitch and auxiliary CVs, 16 bit conversion, pitch bend, accent and legato outputs. very stable, accurate DAC Specification Brief Overview: Pitch CV output: 1 volt per octave (1V/oct). -2v to 6V range Auxiliary CV output: -2 to 8V range. Variable range Gate output: 12V Accent output: 5V Legato output: 5V DAC: dual channel, 16 bit Software controlled fine tune and scale, stored in memory Transpose: 0 to+15 semitones Highly stable CV outputs. No drift 1 LED 2 push buttons MIDI In and Thru Dimensions: 12HP Power: +5, +12, -12 Power M2CV requires +5v, +12v and -12V. The connector used is a 14pin boxed header and is compatible with Concussor and Doepfer style power connectors. Ensure the power lead is connected the correct way round. Pin 1 is -12V (cable stripe). Controls & Sockets: Program and Manual Trigger buttons . CV1 out, CV2 out, Gate out, Accent out, Legato out