Analogue Solutions SQ8 CV / Gate Sequencer NoiseBug Price : $185.00 Related Items: Analogue Solutions modules are the same physical size and use the same power connectors as Doepfer a100 modules. They will mount in Doepfer eurorack cases and are 100% compatible when patching. The red stripe on the power ribbon is red line down if used with Doepfer cases. Included is a eurorack power ribbon and eurorack screws. Analogue Solutions screws available upon request. When using this module in a Doepfer case, an a-100 ad5 +5v adapter board is required. Width 18HP Manufacturer Description: Analogue Sequencer CV and Gate sequencer Width 18HP Requires 5V Analogue sequencers allow you to program a set of voltages and Trigger events (8 in this case), and allow you to step through them by using a clock signal or LFO square wave. With each step, then next voltage as set by the control is present at the CV output. This way repeating melodic lines can be produces. The sequencer need not control pitch, it could be used to change the filter cut-off, volume, or LFO speed. The advantage analogue sequencers have over hardware sequencers is firstly their immediacy. Having all the controls, switches and sockets in front of you allows quicker programming. Secondly, as the output is an analogue control voltage and not a digital MIDI signal, the output of analogue sequencers can easly be mixed with other voltages, or processed in some way. The SQ8 is a single channel sequencer with 8 steps. As it is single channel, larger sequencing systems can be built up by doubling up on sequencers. As they are all separate, you can clock them at different speeds or clock divide ratios. Inputs: Reset In Clock In Outputs: CV Range 0-5V /10V Gate Step b1 Out Clock Through Power: +/-12V, +5V Controls: 8 x CV knobs with integral Gate switch Range Switch Step Button Indicators: 8x Step LED's Size: 18HP The SQ8 requires +5v power Controls & Sockets: 8x CV controls, with integral Gate switch, Step button, Range switch (5V/10V). 8x Postition LEDs. Step 1 out, Reset In, Clock In, Clock Through, CV out, Gate Out