Return to the NoiseBug home page Have you put any NoiseBug goodies in your shopping cart? NoiseBug Ordering Information Virtually tour our Pomona Store! Got questions? NoiseBug has answers! Search the NoiseBug site for the product of your choice

Moog Music Werkstatt-Ø1  Analog Synthesizer
Moog Music Werkstatt-Ø1 Analog Synthesizer

NoiseBug Price : $199

The Moog Music Werkstatt-Ø1  Analog Synthesizer is not in stock.

Related Items:

Manufacturer Description:
The Werkstatt Ø1: Moogfest 2014 Kit is a patchable and compact one oscillator analog synthesizer. It was originally created as a kit, to be the foundation for exclusive “Engineering VIP” workshops at Moogfest 2014. Due to a number of requests, Moog is offering a no-soldering-required version of the Werkstatt 01: Moogfest 2014 Kit in limited quantities, at select US dealers. Assembly is extremely simple: any user can quickly build an analog synthesizer based on classic Moog circuits, and if desired, modify it. Werkstatt was created to be an educational tool, but it is also a very powerful, compact analog synthesizer from Moog. Werkstatt is 100% US made.

• Single VCO w/ frequency control (8Hz to 16KHz)
• Saw and square waveshapes w/ control for square pulse width
• Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch w/ Amount control
• Ability to PWM the square wave

• Classic 4-Pole Moog Ladder Filter w/ Resonance control (20Hz-20KHz)
• Select between the Envelope generator and LFO as Mod Source.
• Polarity switch (+/-) and amount knob for control of filter cutoff modulation

• Selectable Square or Triangle waveshape w/ rate control (2Hz-600Hz)

• Select between the Envelope Generator or ON (Drone)

• Controls for Attack & Decay time w/ Sustain On/Off switch

• One octave low-note priority legato keyboard w/ glide control

• VCA Input 0V to +5V in VCA EG Mode, +/-2.5V in VCA ON Mode
• VCF Input -5V to +5
• VCO LINEAR FM Input +/-2.5V - NOTE: this is an inverting control input
• VCO EXPONENTIAL FM Input -5V to +5V, 1V/Octave trimmable
• LFO CV Input 5V to +5V – NOTE: Negative CV slows LFO more than the panel
• VCF AUDIO Input Unbuffered/Unmixed AC coupled input to VCF
• 2x KB CV Output 3V/semitone from 1 keyboard - NOTE: Attenuate for 1V/Octave
• 2x TRIG Output 5 msec pulse, 0 to +5 V signal generated from low-note priority
• 2x GATE Output 0 to +5V signal generated from low-note priority
• 2x EG Output 0 to +5V signal, Simple ASD or AD type Envelope Generator
• 2x LFO Output -2.5 to +2.5V Triangle or Square wave, selected via LFO Switch
• 2x VCF Output -2V to +2 V signal for audio or CV uses
• 2x VCO Output 0V to +5V VCO signal, wave selected by VCO Wave Switch

Rear Panel
• AUDIO Output Nominal +/-1.5V Signal
• POWER +12VDC Center Positive w/ 1.2A Wall transformer

Your destination for Large Format Modular and Hardware Synthesizers in the USA