Noisebug
Return to the NoiseBug home page Have you put any NoiseBug goodies in your shopping cart? NoiseBug Ordering Information Virtually tour our Pomona Store! Got questions? NoiseBug has answers! Search the NoiseBug site for the product of your choice

 
Vermona Mono Lancet monophonic analogue desktop synthesizer
Vermona Mono Lancet monophonic analogue desktop synthesizer

NoiseBug Price : $479

Yes, the Vermona Mono Lancet monophonic analogue desktop synthesizer is in stock!

Manufacturer Description:
True size comes from within!
The Mono Lancet is a compact synthesizer with big sound, easy user interface and charm.

Oscillators

Two analogue oscillators take care of a solid sound foundation. Oscillator one creates triangle-, sawtooth- and square waves and can be set one octave lower than the second oscillator. The latter produces white noise instead of the triangle wave. The pulse width can be modulated through the modulation wheel (MIDI) and/or an external control voltage (see Extension). The glide generator has a legato mode or can always be active. Filter

The voltage controlled lowpass filter has a slope of 24db per octave. On high resonance settings it starts to self-oscillate and produces a stable sine wave that can be played in a range of about 2 ½ octaves. On MIDI site the cutoff frequency can be controlled by velocity and/or aftertouch.

Amplifier

There’s a good sounding VCA inside the Mono Lancet that can be modulated by the ADSR- or a fixed organ-like envelope. On demand it additionally can respond to velocity.

Modulation

The classical ADSR envelope generator can modulate the VCO- and VCF frequency and the VCA. The LFO generates rectangle- and triangle waveform as well as sample & hold and is modulation source for VCF and VCO.

Extension

There’s a 25pin sub-D connector on the rear of the Mono Lancet. It extents the possibilities of the synthesizer enormously through numerous in- and outputs for control voltages and audio signals. PWM and filter input are just two of them.

Technical Specifications

VCO1

* Waveform: Square, Sawtooth, Triangle
* Octave: 8’, 16’, 32’

VCO2

* Waveform: Square, Sawtooth, White Noise
* Octave: 4’, 8’, 16
* Detune +/- 7 semitones

VCO1 & 2

* controller for LFO intensity
* controller for EG intensity (+/-)
* Glide (legato mode or always active)
* MIX controller
* PWM via MIDI (modulation wheel)
* Mastertube +/- 1 tone

VCF

* 24 dB/octave lowpass filter
* resonance can be played over a range of 2 1/2 octaves
* controller for EG intensity (+/-)
* Keytrack: Off, 50%, 100%

VCA

* Mode: EG, GATE envelope, ON

LFO

* Waveform: Square, Triangle, Sample & Hold
* Frequency range: ca. 0,05 Hz – 250 Hz

Envelope Generator

* Attack, Decay, Sustain, Release

MIDI Interface

* note on/off
* Pitch Bender on/off (CC 84) - affects VCO pitch (+/- 4 tones)
Modulation Wheel on/off (CC 85) - affects pulse width of the VCOs
* Aftertouch on/off (CC 86) - affects cutoff frequency
* Velocity on/off (CC 87) - affects VCA
* Velocity can additionally be set to cutoff frequency (CC 88)
* Glide-Switch on/off (CC 89) - glide only works when playing legato
* Legato on/off (CC 90) - envelope will not be retriggered when playing legato

Measurement & Weight

* Width: ca. 210 mm
* Depth: ca. 145 mm
* Height: ca. 55 mm
* Weight: ca. 750 g

Sound Samples











Your destination for Large Format Modular and Hardware Synthesizers in the USA