Erica Synths - Fusion Delay/Flanger/Vintage Ensemble
For more flexibility lowpass filtering is fully adjustable from none to extreme. A special feature, not found in eurorack, is the Vintage Stereo Ensemble – an effect that’s common on vintage synthesizers to create a moving and thick spatial sound from a monaural tone generator, be it FM, DCO or any other kind. Such a spatial effect is achieved by mixing dry source with delayed and lowpass filtered out of phase signal.
All Fusion modules by default are configured to work with regular eurorack PSU.
Due to the fact that cold tube heaters have lower resistance, Fusion modules have significant power consumption peak at startup, when power consumption almost doubles for 1-2 seconds. This is not a problem with linear PSUs that have power inertia, but may cause switching PSU internal protection turn off the power supply. Please make sure your PSU has some headroom before installing multiple Fusion modules.
2 bbd chips (1024 and 4096 stages)
delay and flanger effects
vintage ensemble stereo effect
tube overdrive in the delay output and feedback path
passive lowpass filter for extreme subbass sound
audio input signal level: up to 20v ptp
max delay time short setting: 20ms
max delay time long setting: 200ms
lfo range: 0.1hz - 30hz
power supply: bipolar +-12v , eurorack standard and erica synths 6vac psu
power consumption: tube heater psu configuration: 35ma@+12v, 20ma@-12v, 300ma@6vac
eurorack psu configuration: 35ma@+12v, 170ma@-12v (nb - start-up power consuption for few seconds is +-250ma)
module width: 20hp
module depth: 35mm