Vermona - QMI2

Vermona - QMI2

  • $329.00


Manufacturer Description:

Vermona´s QMI2 is a very flexible yet affordable
MIDI/CV interface which can be up to four voice polyphonic. You can use
it as four independent interfaces or in a mixed mode with simultaneous
monophonic and polyphonic modes.



Details



• there is a new GATE input which allows switching between monophonic
play modes M1 and M2 using a gate signal.
• the qMI 2 now has three clock outputs (instead of four on the former
version). Each clock out can be set up individual for sending 1/4, 1/8,
1/16 and 1/8T triggers generated out of the incoming MIDI clock.
• Each channel button can generate either a trigger signal with fixed
length (10ms) or a gate signal.


Each of the "output channels" has a CV output with 1V/octave, a gate
output and two further control voltage outputs for MIDI controllers like
modulation wheel and pitch bend wheel. The output channels can be
combined arbitrarily with each other or used totally independent with
different MIDI channels. Combined output channels can be unisono,
monophonic with rotating voice assignation or polyphonic.



There are four clock divider outputs that convert incoming MIDI clock
signals as analog gate voltages. A reset output allows e.g for keeping
step sequencers (with an according reset input) by MIDI start/stop
commands in sync.



An important part of the concept is the simple use of all parameters without a display and complicated menu structures.



pitch-CV: 1V/octave

Gate voltages: 10V

CV1, CV2: 0-5V (or -2,5V..+2,5V with pitch bend)

legato function switchable per output channel

clock outputs (10V): 1/4, 1/8, 1/16 and 1/8T (can be doubled)

RESET output: 10V at MIDI STOP, 0V at MIDI START or CONTINUE



Inputs and Outputs



MIDI input

outputs per channel 1-4: Gate, 1V/Okt, CV1, CV1

clock depending outputs: reset, 1/4, 1/8, 1/16, 1/8T



Measures and Weight



3U Eurorack module, 24HP wide, 30mm deep. Current draw 60ma