The OLED display allows to adjust the MIDI parameters to be controlled, their range, their direction and many other settings. The same MIDI messages are sent to the classic 5-poles DIN MIDI port (using the included adapter) and to the USB port. Analog signals are sent to the CV and gate outputs. For certain configurations, the analog ports are used as analog sync transmitters. There is also an audio output that produces a signal whose pitch varies with the hand distance. Parameters can be (soft) quantized.
There are 5 example presets included and 5 user-presets which make it very fast to recall a certain configuration.
|Configurations||Note on + continuous pitch
Sequencer start/stop + CC74
Sequencer start/stop + pitchbend
Sequencer start/stop + analog clock
Sequencer start/stop/tempo control + analog clock
|MIDI outputs||TRS and USB-MIDI
A TRS-to-DIN 5 poles adapter is included.
|Analog outputs||CV 0-5V
In some configurations the GATE out provides an analog SYNC signal
|Audio output||“Lo-fi” reference tone, up to 5Vpp
Can be used directly with phones or as audio source.
|Sensor range||User configurable, up to 50cm (19.7″)|
|Presets||5 ROM, 5 user defined|
4x 3.15mm jack outputs
|Power||5V via USB, typical 100mA (1A capable supply recommended)|
|Dimensions||80mm x 80mm x 20mm|