This is a limited edition combination of the Generator & GenXpander
New old stock, brand new in box
Generator
[No Longer In Production]
Dual Oscillator FM Monster
A dual oscillator built around two triangle core, wide range, periodic waveform generators. As a multipurpose signal generator, it can provide the basis of a wide range of complex sounds ideal for tuned percussion/noise, abrasive amplitude, frequency and timbral modulation. Tones, drones, textures, and drums to atonal, nintendo zipper/fart noises. This module was made for FM madness.
GenXpander
[No Longer In Production]
Waveshaper / Wavemangler Expander Module for the Generator
The GenXpander is an expander module for the Generator. It adds standard waveform outuputs, internal FM waveform selection, and extensive waveshaping capabilities to the Generator module.
The GenXpander has 4 separate sections.
Waveshaper
The waveshaper circuit uses a triangle wave and square wave from one or both of the oscillators on the Generator module to create a saw wave and a pulse wave. Attenuated CV control of the pulsewidth and saw shape is available. A switch for the triangle wave and a switch for the square wave determine which oscillator the seed waveforms are taken from.
Selecting the same oscillator for both triangle and square will provide a clean saw wave. Selecting different oscillators for the triangle and square waves will provide a very interesting modulating, saw-triangle-square type waveform.
FM Wave Switch
Determines the waveform used by oscillator 1 (GEN1) to internally modulate oscillator 2 (GEN2). The Generator ships with the internal FM set to the variable waveform. The switch allows the frequency modulation waveform to be changed to a triangle wave.
Standard Waveform Outputs
Separate triangle and square wave outputs for both oscillator 1 (GEN1) and oscillator 2 (GEN2)
BAD Outputs
An odd/even harmonic detector, frequency mixer & waveshaper. It inverts the polarity of the triangle waves based on the frequency relationship between oscillator 1 (GEN1) and oscillator 2 (GEN2).
OE Output:
Regular polarity oscillator 1 triangle if the difference between oscillator 1 (GEN1) and oscillator 2 (GEN2) is an even number.
Inverted polarity
oscillator 1 triangle
if the difference between
oscillator 1 (GEN1) and oscillator 2 (GEN2)
is an odd number.
DIF output:
Polarity of oscillator 2 triangle is changed at a frequency equal to the difference between oscillator 1 (GEN1) and oscillator 2 (GEN2). If
oscillator 1 (GEN1) and oscillator 2 (GEN2)
are the exact same frequency then the DIF output is the same as the oscillator 2 triangle output.
![Pittsburgh Modular- Generator X [NOS]](http://www.noisebug.net/cdn/shop/files/Screenshot2023-11-29at11-28-45PittsburghModularGeneratorX.png?v=1701286125)